Loading...
> >

General Freebie Requests

1…3233353738…50

Comments

  • KeryaKerya Posts: 10,943
    edited December 1969

    drcharbonneau said:
    ...

    The SDK sounds great! Put it on the cart. Now I can't find the link to my download page. Went o "My Account" but it appears to have changed.

    Click on Product library / Click on Purchase date

  • drcharbonneaudrcharbonneau Posts: 0
    edited December 1969

    Kerya said:
    drcharbonneau said:
    ...

    The SDK sounds great! Put it on the cart. Now I can't find the link to my download page. Went o "My Account" but it appears to have changed.

    Click on Product library / Click on Purchase date

    That helped a bit, but SDK is not there. I recall with DAZ 4.5pro an email was sent to me. That didn't happen this time and when I realized I hadn't logged in when I first clicked "add to cart" I logged in, tried again and received the error "... [only one can be had]..."

  • ChoholeChohole Posts: 33,604
    edited December 1969

    This really isn't the sort of convo that should be going on in the General Freebie Request Thread, however if you get that error it means that you have added something to your cart when you are not fully logged into the store, so Login and then add something else to the cart, this tells the poor confuzzled software who you are and it now adds the first item as well. You can now remove the unwanted item and proceed normally.

  • drcharbonneaudrcharbonneau Posts: 0
    edited April 2013

    Hi chohole,

    I was concerned about that off topic issue. It was a proliferous event, not intent.

    NTL, I'll try again.

    Edit: No cigar.

    Post edited by drcharbonneau on
  • patience55patience55 Posts: 7,006
    edited December 1969

    drcharbonneau said:
    Hi chohole,

    I was concerned about that off topic issue. It was a proliferous event, not intent.

    NTL, I'll try again.

    Edit: No cigar.

    I sent you a PM.

  • patience55patience55 Posts: 7,006
    edited April 2013

    BreaSidhe said:
    I used to have this great headpiece for V3 before my hard drive crashed. I can't find it anywhere anymore. I used it on V4 with minor adjustments and it is the one thing I really miss. Sorry I don't have a better picture of it. Anyone think they could remake it for V4 or Genesis?

    A couple of thoughts cross the mind.

    1st. who made the original? Somebody mind if we remake their stuff.

    2nd For yourself, if you take V4 into Hexagon and make the lines [using the line tools perhaps] on her head where you want them, then thicken them, add some spheres here and there, etc. Slap a uvmap on the new .obj. Delete V4, export out the new .obj.
    Can be as a prop or even made into a prop file. In the scene, parent it to the head.

    Post edited by patience55 on
  • Serene NightSerene Night Posts: 17,639
    edited December 1969

    I'm looking for a wrench and some realistic tools, if anyone has seen them. Commercial use preferred. Gras

  • ChoholeChohole Posts: 33,604
    edited December 1969

    SereneNight said:
    I'm looking for a wrench and some realistic tools, if anyone has seen them. Commercial use preferred. Gras

    Have you checked through this list? http://www.daz3d.com/forums/discussion/625/

  • Serene NightSerene Night Posts: 17,639
    edited December 1969

    chohole said:
    SereneNight said:
    I'm looking for a wrench and some realistic tools, if anyone has seen them. Commercial use preferred. Gras

    Have you checked through this list? http://www.daz3d.com/forums/discussion/625/

    Thanks Chohole!

  • grylingrylin Posts: 278
    edited December 1969

    was wondering about the Radii shoes? :O or any thing like them yet out there? :) thanks for any help :)

  • solo_actsolo_act Posts: 4
    edited December 1969

    Would someone do me a favor?: Point me in the direction of a toga/toga-like sheet or wrap for the whole body (not short, like the dynamic one at the store); for V4, V3, M4, etc, it doesn't matter. Examples (in the group shot, toga on the left would be perfect):

    l1752-709grecja-kokino-nero.jpg
    700 x 525 - 35K
    abby_greek_speech.jpg
    300 x 400 - 18K
  • robkelkrobkelk Posts: 3,259
    edited December 1969

    solo_act said:
    Would someone do me a favor?: Point me in the direction of a toga/toga-like sheet or wrap for the whole body (not short, like the dynamic one at the store); for V4, V3, M4, etc, it doesn't matter. Examples (in the group shot, toga on the left would be perfect):

    Poser dynamic cloth, for M4:
    http://www.sharecg.com/v/50664/related/5/3D-Model/Roman-Male-Toga

  • solo_actsolo_act Posts: 4
    edited December 1969

    robkelk said:

    Poser dynamic cloth, for M4:
    http://www.sharecg.com/v/50664/related/5/3D-Model/Roman-Male-Toga

    Thanks.

  • greysgreys Posts: 335
    edited April 2013

    I'm looking for a trident, if anyone knows of a good one?

    ETA: And while I'm here anyway, a chariot that works with Horse 2 would be great. :)

    Post edited by greys on
  • KeryaKerya Posts: 10,943
    edited December 1969

    temporal.ranger said:
    I'm looking for a trident, if anyone knows of a good one?

    ETA: And while I'm here anyway, a chariot that works with Horse 2 would be great. :)

    Trident?
    http://www.sharecg.com/v/68691/browse/11/Poser/Atlantean-Fork

  • greysgreys Posts: 335
    edited December 1969

    Kerya said:
    temporal.ranger said:
    I'm looking for a trident, if anyone knows of a good one?

    ETA: And while I'm here anyway, a chariot that works with Horse 2 would be great. :)

    Trident?
    http://www.sharecg.com/v/68691/browse/11/Poser/Atlantean-Fork

    Thanks! :D

  • NetWorthyNetWorthy Posts: 0
    edited December 1969

    Hi guys. I'm looking for a table fan, preferably old fashioned or vintage, but anything will do. Freebie or purchase. Thanks!

  • fleetppfleetpp Posts: 199
    edited December 1969

    NetWorthy said:
    Hi guys. I'm looking for a table fan, preferably old fashioned or vintage, but anything will do. Freebie or purchase. Thanks!

    There's one at sharecg that's part of the arcade hotel package.
    Here's the link

    http://www.sharecg.com/v/47342/related/11/Poser/Arcade-Hotel

  • NetWorthyNetWorthy Posts: 0
    edited December 1969

    Perfect, just what I was looking for - and the other stuff in this set is interesting too!

  • CyberDogCyberDog Posts: 232
    edited December 1969

    I am looking for a dog leash. I plan to use with the mil dog but and leash should work.

  • Sailoraurora17_ad2c0753abSailoraurora17_ad2c0753ab Posts: 40
    edited December 1969

    Looking for a minbari headpiece from Babylon Five for poser/Daz studio. I've been looking all over, but the one site that had one is apparently outdated and no longer works.

  • robkelkrobkelk Posts: 3,259
    edited December 1969

    AuroraMoon said:
    Looking for a minbari headpiece from Babylon Five for poser/Daz studio. I've been looking all over, but the one site that had one is apparently outdated and no longer works.

    When I discover links no longer work, I plug them into the Internet Archive's "Wayback Machine" and see whether they kept a copy of the website. That works roughly one-fifth of the time for me, so it's worth a try... but you need the old URL.
    http://archive.org/web/web.php
  • CMKook-24601CMKook-24601 Posts: 200
    edited December 1969

    I am looking for a classic NES controller, I have found several on turbo squid how ever a few don't load i poser 8 and the others when you try to add the texture map they come with they don't apply on it right.. then map on side ways ore some other messed up way

  • caine collincaine collin Posts: 0
    edited December 1969

    I'm looking for a Buzz Cut hairstyle. Doesn't have to be free.

  • blue_chameleon2002_d161d19223blue_chameleon2002_d161d19223 Posts: 0
    edited April 2013

    caine collin said:
    I'm looking for a Buzz Cut hairstyle. Doesn't have to be free.

    Don't know if this will work for you http://browse.deviantart.com/art/SOTO-s-Flat-Top-for-GENESIS-352455619

    Also try looking through this collection on Sharecg. Might be something in here you can use.
    http://www.sharecg.com/pf/full_uploads.php?pf_user_name=mylochka&division_id=11&s=dd&pn=1

    Post edited by blue_chameleon2002_d161d19223 on
  • KeryaKerya Posts: 10,943
    edited December 1969

    And if you prefer M4:
    http://shop.poseraddicts.com/index.php?act=viewProd&productId=3612

  • WilmapWilmap Posts: 2,917
    edited December 1969

    Anyone know where I can find a typewriter, preferably a more modern one not antique. Sort of thing secretaries used to use in offices etc.

  • KeryaKerya Posts: 10,943
    edited December 1969

    Typewriters ... don't ask me why I can only find old ones ...
    http://www.wg3d.com/downloadsx.html
    http://thefree3dmodels.com/stuff/accessories/typewriter/21-1-0-3082
    http://archive3d.net/?a=download&id=b1778795
    http://3d-land.net/3D_model/typewriter.html
    http://3d-land.net/3D_model/typewriter.html

  • caine collincaine collin Posts: 0
    edited December 1969

    Thanks Chameleon2002 and Kerya, The high and tight one was perfect!

  • CyberDogCyberDog Posts: 232
    edited December 1969

    I haven't found a leash so I used a posable chain by Bionicrooster. I found it at sharecg. If anyone does see a dog's leash I would still like to have one.

This discussion has been closed.