General Freebie Requests

CP88

I'm looking for an 18th-century knife or dagger. All I've been able to find are modern combat knives, or medieval/fantasy-style daggers; I'm kind of looking for something halfway in between.

Anybody know of anything?

DollyGirl

CP88 said:

I'm looking for an 18th-century knife or dagger. All I've been able to find are modern combat knives, or medieval/fantasy-style daggers; I'm kind of looking for something halfway in between.

Anybody know of anything?

This might work
http://www.sharecg.com/v/30153/browse/11/Poser/Duellist-V4

or this
http://www.sharecg.com/v/67399/browse/5/3D-Model/Renaissance-Rapier-and-Dagger

turbosquid has some options you might want to browse through

http://www.turbosquid.com/Search/Index.cfm?keyword=dagger&x=0&y=0

lexbaird

Dollygirl said:

or this
http://www.sharecg.com/v/67399/browse/5/3D-Model/Renaissance-Rapier-and-Dagger

Dollygirl beat me to it, though it is circa 1600, not 18th c.. I've got a scabbard made for it, but need to do one for the rapier before I get it posted.

patience55

lexbaird said:

New request? I am looking for hot coals. Specifically, for a blacksmith forge or a smouldering fire look. Since I haven't learned shaders yet, is there something that would put a glowing coal texture on a rock shape?

You don't require a shader. If you have an image, you can apply it using the Surfaces Tab. Scrolling down on that tab are the dials/sliders to increase the tiling as required.

There were some coals for a fireplace I think, over at sharecg.com.

edit: yes ... http://www.sharecg.com/v/41639/gallery/11/Poser/charcoal_for_roman_brazier

lexbaird

Those coals will work for a base. I guess I'll have to whip up a texture to make them glow.

Thanks!

patience55

lexbaird said:

Those coals will work for a base. I guess I'll have to whip up a texture to make them glow.

Thanks!

You're welcome.

Could also throw in a point light or 2 for some glowing red.

Tallulahdahling

I've been looking for a set to make V4 into the Statue of Liberty. It would be great to have morphs and a texture to make V4 herself *look* like the statue, but what I need most of all is the costume, with the robes, crown, tablet, and torch. I know that either RDNA or Renderosity had a punk version of the crown and, I think, the torch, but I want something that looks authentic to the real statue.

Dynamic robes would be a plus, but beggars can't be choosers!

It doesn't *have* to be free. At this point I'm quite willing to pay to get what I want. But, of course, a good free set would be welcome.

I've looked in quite a few places for this, and I'm really surprised that I haven't been able to find anything.

fleetpp

Tallulahdahling said:

I've been looking for a set to make V4 into the Statue of Liberty. It would be great to have morphs and a texture to make V4 herself *look* like the statue, but what I need most of all is the costume, with the robes, crown, tablet, and torch. I know that either RDNA or Renderosity had a punk version of the crown and, I think, the torch, but I want something that looks authentic to the real statue.

Dynamic robes would be a plus, but beggars can't be choosers!

It doesn't *have* to be free. At this point I'm quite willing to pay to get what I want. But, of course, a good free set would be welcome.

I've looked in quite a few places for this, and I'm really surprised that I haven't been able to find anything.

It's not free, but Frankie Von Stein for V4 has a very nice greenish skin texture http://www.daz3d.com/frankie-von-stein

DollyGirl

Tallulahdahling said:

I've been looking for a set to make V4 into the Statue of Liberty. It would be great to have morphs and a texture to make V4 herself *look* like the statue, but what I need most of all is the costume, with the robes, crown, tablet, and torch. I know that either RDNA or Renderosity had a punk version of the crown and, I think, the torch, but I want something that looks authentic to the real statue.

Dynamic robes would be a plus, but beggars can't be choosers!

It doesn't *have* to be free. At this point I'm quite willing to pay to get what I want. But, of course, a good free set would be welcome.

I've looked in quite a few places for this, and I'm really surprised that I haven't been able to find anything.

Tallulah,
I found this, it is a statue, non-commercial use:
http://www.renderosity.com/mod/freestuff/details.php?item_id=65690

For outfit options these are for V2 but maybe with some tweeking they could be used, Roma robes:
http://www.runtimedna.com/RDNA-Roma-Clothing-for-Victoria-2.html

For Liberty's crown this pack has a spike neckband that I think would work for the crown.
http://www.runtimedna.com/DNA-Fit-For-A-Queen-V2-Clothing-and-Props-Pack.html

CP88

Dollygirl said:

CP88 said:

I'm looking for an 18th-century knife or dagger. All I've been able to find are modern combat knives, or medieval/fantasy-style daggers; I'm kind of looking for something halfway in between.

Anybody know of anything?

This might work
http://www.sharecg.com/v/30153/browse/11/Poser/Duellist-V4

or this
http://www.sharecg.com/v/67399/browse/5/3D-Model/Renaissance-Rapier-and-Dagger

turbosquid has some options you might want to browse through

http://www.turbosquid.com/Search/Index.cfm?keyword=dagger&x=0&y=0

or this
http://www.sharecg.com/v/67399/browse/5/3D-Model/Renaissance-Rapier-and-Dagger

Dollygirl beat me to it, though it is circa 1600, not 18th c.. I've got a scabbard made for it, but need to do one for the rapier before I get it posted.
I've found the two rapier/dagger sets; they're both the medieval style I was talking about.

Turbosquid did have a couple that were the right type, but I can't afford them.

For the record, I'm looking for something akin to http://www.turbosquid.com/3d-models/3ds-sword-cutting/354774, although http://www.turbosquid.com/FullPreview/Index.cfm/ID/553874 would work too. Anybody know of something like that?

Kerya

For the dagger ... maybe one of these?
http://www.3dtrue.com/poser/index_4.html
http://lynnart.net/models/weapons/
http://www.tonylynchdesigns.com/
http://www.jalberts.net/francemi/3dSC/medieval.htm

feori

I am looking for a fantasy or medieval backpack. I have found a few modern ones, but nothing for a knights and dragons type setting. Free or purchase would be fine.

Thanks!

perlk

Try asking in the General Freebie Requests thread. http://www.daz3d.com/forums/discussion/57/P960/

A lot of people read it and might know where you can find one.

feori

Sorry - I thought that was where I was. Not sure how I got messed up there. Thanks!

feori

I am looking for a fantasy or medieval backpack. I have found a few modern ones, but nothing for a knights and dragons type setting.

Thanks!

Eustace Scrubb

Does anyone have a Gen3 Male texture (Mike3, David3, Hiro3) for a "black" skintone? It does not have to have body hair: generic is good, but I need it to look plausibly good as a MALE skintone. African or East-Indian is fine, and I already have Yahowi.

robkelk

Eustace Scrubb said:

Does anyone have a Gen3 Male texture (Mike3, David3, Hiro3) for a "black" skintone? It does not have to have body hair: generic is good, but I need it to look plausibly good as a MALE skintone. African or East-Indian is fine, and I already have Yahowi.

There are a couple of dark-brown skin textures amongst the fantasy skintones in Arrogathor's H3 package: http://sharecg.com/v/58539

DollyGirl

Eustace Scrubb said:

Does anyone have a Gen3 Male texture (Mike3, David3, Hiro3) for a "black" skintone? It does not have to have body hair: generic is good, but I need it to look plausibly good as a MALE skintone. African or East-Indian is fine, and I already have Yahowi.

This is what I found:
http://www.renderosity.com/mod/freestuff/details.php?item_id=34573
This artist has both V3 and M3 textures. They can be interchanged.
http://www.sharecg.com/pf/full_uploads.php?pf_user_name=copilote

And if you heart is not set on Gen 3 models RenderCandy has a really nice M4 texture:
http://rendercandy.com/index.php/cPath/25

Eustace Scrubb

Copilote's M3 texture is the one I already have, thanks (as well as a couple of his V3s) and I've got two or three M4 skins (including The Boss) in the right range, too. Unfortunately, the Rendo download link is not working for me today. Thanks!

CP88

Kerya said:

For the dagger ... maybe one of these?
http://www.3dtrue.com/poser/index_4.html
http://lynnart.net/models/weapons/
http://www.tonylynchdesigns.com/
http://www.jalberts.net/francemi/3dSC/medieval.htm

Are those compatible with Daz Studio?

Eustace Scrubb

Any Poser format mesh can be opened in DAZ|Studio: that's always been the case with the exception of the dynamic hair and, more recently, the Poser weightmap rigs in older D|S versions. Use any of them you want to.

Sylvan

I am looking for a remote control for a television...any clues?

Tallulahdahling

Thanks for the suggestions fleetpp and, Dollygirl! I'll check those out. : )

Kerya

Estroyer said:

I am looking for a remote control for a television...any clues?

http://www.sharecg.com/v/28652/browse/11/Poser/Ultimate-Tv-Remote
http://sullysdragons.com/models.htm

Sylvan

Thanks Kerya! That one didn't pop up at ShareCG when I searched there :O

perlk

Looking for a lawn chair for free, anyone know of any out there?

DollyGirl

perlk said:

Looking for a lawn chair for free, anyone know of any out there?

This set has one but the artist has reserved all of the rights.
http://www.sharecg.com/v/66353/browse/11/Poser/Edelzelt
These are all .3ds models but Poser can handle them.
http://archive3d.net/?tag=Lounge

perlk

Dollygirl said:

perlk said:

Looking for a lawn chair for free, anyone know of any out there?

This set has one but the artist has reserved all of the rights.
http://www.sharecg.com/v/66353/browse/11/Poser/Edelzelt
These are all .3ds models but Poser can handle them.
http://archive3d.net/?tag=Lounge

Thanks. I found one that I was looking for: http://www.all3dmax.com/travis/?p=273

Gonna see if this works...

Teloxi

I gots one hard to answer lol It'll probably have to be created (which I have absolutely no clue how to do). The eagle head/feathered headpiece for Zoar, Sorceress of Greyskull from the 80's He-Man cartoon. I got the neat Daz V4 wings, I can make textures for V4 body suit or 2nd skin, as well as for the wings. I just need the darn head piece!

BWSman

perlk said:

Dollygirl said:

perlk said:

Looking for a lawn chair for free, anyone know of any out there?

This set has one but the artist has reserved all of the rights.
http://www.sharecg.com/v/66353/browse/11/Poser/Edelzelt
These are all .3ds models but Poser can handle them.
http://archive3d.net/?tag=Lounge

Thanks. I found one that I was looking for: http://www.all3dmax.com/travis/?p=273

Gonna see if this works...

This one is Poser/DS ready.
http://www.contentparadise.com/productDetails.aspx?id=14238