Loading...
> >

CAR AND BIKE LOVERS THREAD - MARK V

1…3334363839

Comments

  • hacsarthacsart Posts: 2,025
    edited October 2022

    That orange Harley is based on  Billiy's  bike from Easy rider..  Ran these up in 2020.  and notice the small black triangle on the transmission - that's an error in the conversion from d-EASM to STL..

    Slightly past halfway down the page -

    https://www.daz3d.com/forums/discussion/349811/car-and-bike-lovers-thread-mark-v/p10

    billy_bike_1.jpg
    1680 x 1050 - 1009K
    billy_bike_2.jpg
    1680 x 1050 - 932K
    billy_bike_3.jpg
    1680 x 1050 - 962K
    billy_bike_4.jpg
    1680 x 1050 - 1M
    Post edited by hacsart on
  • hacsarthacsart Posts: 2,025
    edited October 2022

    That particular model was done up in Solidworks by Terry Stonehocker over at Grabcad in November 2012  - I was lucky enough to have him convert it to an .stl format.. He has done  quite a few decent bike models, including the Captain America bike from Easy Rider.. and there's an error in the original that I had to correct in my final version  (the error is visible in these renders). The clutch cable does not go all the way down to the mousetrap on the left hand side.. (there should be a  cable that goes from the left handlebar lever to the top of the spring assembly on the left hand side of the frame.. In the real thing those could be a real pain to adjust, especially if the spring levers slipped and caught your finger)

    it took a long time to get a cable in DAZ that fit..

    https://grabcad.com/library/billy-bike

    https://grabcad.com/library/captain-america-bike

    music2u4u said:

    Since we are on the subject of bikes, I want to share with you something. I have been here at Daz for many many years. I go way back to the beginning of the Daz program. My mentors were "The Ness" and our leader Richard Haseltine who helped me and picked me up whenever I fell down. I have met many great 3D artists here in that time period. One of them was the great "Catermaran" who was a legend in bike creating and building. Some of you may remember him. He passed away many years ago, but his work was and still is the tops in modeling bikes. One day he told me he did all of his modeling with a CAD program and said that it was the best and I should look into it. So he gave me a site to go visit and see some of the models. When I went there, I came across this bike. It was so stunning and realistic looking that it just about brought tears to my eyes. How could something GC look so real. The detail is amazing. Catermaran verified that this bike was a CAD model. I still have it and it still gives me chills to look at it. It is "ever inspirational" to all bike modelers. I will share it with you all now. Not sure what kind of bike it is but here it is. ( CLICK THE ATTACHMENT PHOTO AT THE BOTTOM TO SEE IT FULL SIZE.)Enjoy!

     

    Post edited by hacsart on
  • hacsarthacsart Posts: 2,025
    edited October 2022

    Here's the model with the corrected cable..

    and here's a kitbashed version, using that bike as a base model..and adding bits from one of Terry's other models..

     

    billy_bike_river_road_2.jpg
    1680 x 1050 - 1M
    billy_bike_wip_v3_1.jpg
    1680 x 1050 - 1M
    Post edited by hacsart on
  • hacsarthacsart Posts: 2,025
    edited October 2022

    again using Terry's models, my favourite kitbash version..

     

    blues_bike_wip_v2_1.jpg
    1680 x 1050 - 923K
    blues_bike_wip_v2_2.jpg
    1680 x 1050 - 915K
    blues_bike_wip_v2_3.jpg
    1680 x 1050 - 900K
    Post edited by hacsart on
  • Robert FreiseRobert Freise Posts: 4,458

    Fine looking bikes

  • kyoto kidkyoto kid Posts: 41,083

    ...love that last one. 

  • hacsarthacsart Posts: 2,025
    edited October 2022

    I"m thinking of using a digital watermark on all my images from now on.. 

    Post edited by hacsart on
  • hacsarthacsart Posts: 2,025
    edited October 2022

    Another of Terry's Harleys models - 1952 FL

    invisible_watermark_1952_FL_stock_2_8a.jpg
    1680 x 1050 - 2M
    Post edited by hacsart on
  • ZateticZatetic Posts: 286

    Lamborghini Aventador Sport

  • hacsarthacsart Posts: 2,025

    Love the colour!

  • DanaTADanaTA Posts: 13,222

    Purple!   Cool car, too.

    Dana

  • Robert FreiseRobert Freise Posts: 4,458

    hacsart said:

    Love the colour!

    Same here 

  • ZateticZatetic Posts: 286

    Thanks!  The purple is from NVIDIA vMaterials (1.7.0) Effect Pigment Paint - Deep Purple (MDL). 

    I wanted to use Dimension Theory"s Anodized - Custom Shader and Preset Suite for Iray but I couldn't get it to work in Daz 4.20

  • music2u4umusic2u4u Posts: 2,822
    edited October 2022

    Could this be one of Terry's?

    1937Chopper.jpg
    1680 x 1050 - 194K
    Post edited by music2u4u on
  • hacsarthacsart Posts: 2,025

    No , but its one of my renders, so let me dig up the souce..its not a Terry model. stay tuned..

  • hacsarthacsart Posts: 2,025
    edited October 2022

    OK..  turns out it is a Terry model, it started out as a Terry model, but kitbashed some parts (tank and rear wheels) from an old poser set (Billy custom bike series) and the exhaust and some other details from another Terry bike.. Orginal Terry model was a STEP file.

    Post edited by hacsart on
  • ZateticZatetic Posts: 286

    Dodge-B-Series Pickup 1953 Halloween Special

    I found this amazing free model and had to do some renders with it.This work is based on "Dodge B-Series Pickup 1953 Halloween Special" (sketchfab.com/3d-models/dodge-…) by Alex.Ka. (sketchfab.com/Alex.Ka.) licensed under CC-BY-NC-ND-4.0 (creativecommons.org/licenses/b…). I had to make a couple of minor changes in the uv and added rim lights.

    .

  • ZateticZatetic Posts: 286

    Gui Marconi's 1982 Project Car

  • music2u4umusic2u4u Posts: 2,822
    edited November 2022

    Zatetic said:

    Dodge-B-Series Pickup 1953 Halloween Special

    I found this amazing free model and had to do some renders with it.This work is based on "Dodge B-Series Pickup 1953 Halloween Special" (sketchfab.com/3d-models/dodge-…) by Alex.Ka. (sketchfab.com/Alex.Ka.) licensed under CC-BY-NC-ND-4.0 (creativecommons.org/licenses/b…). I had to make a couple of minor changes in the uv and added rim lights.

    .

    I just got this one myself. It is based on the original Dodge B which has a few different holiday versions. I have the Christmas one also but could not get the textures to work on the body writing, so I had to just go with what I could. 

     

    DodgeB-SeriesPickup1.jpg
    1920 x 1080 - 1M
    Post edited by music2u4u on
  • music2u4umusic2u4u Posts: 2,822
    edited November 2022

    I am not sure who submitted this render but I really like this car and really I want it badly. Maybe a link to it with an IM or email it to me at [email protected]. It would be greatly appreciated. This is my kind of car.

     

    1964FairlaneGasser2.jpg
    1680 x 1050 - 203K
    1964FairlaneGasser1.jpg
    1680 x 1050 - 204K
    Post edited by music2u4u on
  • hacsarthacsart Posts: 2,025
    edited November 2022

    That's one of mine... Let me see if I still have it... (this render is over 2 years old),  I believe it was a freebie  it may or may not be still around. There's also a lot of kitbashing in there if I remember rightly..

    EDIT - it was a user built mod for GTA IV - I'll have to find it agaoin and see if it had a CC copyright that allows for re-distribution..

    Post edited by hacsart on
  • music2u4umusic2u4u Posts: 2,822
    edited November 2022

    This is for some of you that did not know that Chevrolet made a Nomad wagon in 1958. Most believe they stopped in 1957, they did not. Here is a nice one by me...lol.

     

     

    1958ChevyNomad1.jpg
    1920 x 1080 - 2M
    Post edited by music2u4u on
  • music2u4umusic2u4u Posts: 2,822
    edited November 2022

    My favorite muscle car of all. 1967 Chevelle SS396, FOUR SPEED. Just can't get enough of a midnight blue one like my friend had in high school. Fastest take off car I ever rode in. I swallowed my gum...hahahah.

     

     

     

    1967ChevelleSS396_1.jpg
    1920 x 1080 - 369K
    Post edited by music2u4u on
  • kyoto kidkyoto kid Posts: 41,083

    ...lovely Chevy classics.

  • hacsarthacsart Posts: 2,025

    That Nomad is nice!

  • Robert FreiseRobert Freise Posts: 4,458

    hacsart said:

    That Nomad is nice!

    What he said 

  • music2u4umusic2u4u Posts: 2,822
    edited November 2022

    Here are a few more I converted today from FBX files. 1969Dodge Charger with the Dodge green. I had to create the color since I do not have a shader that green color.

     

     

     

    1969DodgeCharger2.jpg
    1920 x 1080 - 1M
    Post edited by music2u4u on
  • music2u4umusic2u4u Posts: 2,822
    edited November 2022

    Here is another. A 2001 Lamborghini Mercielago.

     

     

     

    LamborghiniMurcielago2001_3.jpg
    1920 x 1080 - 1M
    Post edited by music2u4u on
  • music2u4umusic2u4u Posts: 2,822
    edited November 2022

    I have had this truck for a long time. But it got all messed up and I lost three tires and the passenger door. So I duplicated the Driver door node and I reversed the X scaler to -100 and it flipped to fit. Then I just duplicated the tire node and now it is fixed. I love this truck. 1959 Chevy Apache.

     

     

     

    1959ApacheTruck1.jpg
    1920 x 1080 - 1M
    Post edited by music2u4u on
  • music2u4umusic2u4u Posts: 2,822
    edited November 2022

    And finally, the Dodge B Series Halloween truck.

     

     

    DodgeSeriesHalloween1.jpg
    1920 x 1080 - 1M
    Post edited by music2u4u on
Sign In or Register to comment.