Loading...
> >

GENERAL FREEBIE REQUESTS part 3

13567…33

Comments

  • Charlie JudgeCharlie Judge Posts: 12,754
    Saphirewild said:

    Does anyone know where I can find some GF2 Preggers morphs?

    http://www.winterbrose.com/Pregnant-Woman-Morph-for-Genesis-2-Female-FREE.html

  • KeryaKerya Posts: 10,943
    Saphirewild said:

    Does anyone know where I can find some GF2 Preggers morphs?

    Not free, but maybe you have this: https://www.daz3d.com/genesis-2-female-body-morphs There is a pregnant morph in the Actor/Waist section.

     

  • OstadanOstadan Posts: 1,125

    I need something like a dropcloth, i.e., a thin plastic sheet that covers a floor, but is sort of crinkly in places, as a real such sheet would be.  A bump map on a plane would do (it's pretty much part of the background), but I don't have the technique even for that.

  • selias19selias19 Posts: 253

    You could have a look at TrekkieGrrl's site. There is a "super morphing sheet" on page 2 (http://trekkiegrrrl.dk/mpp2.htm) second to last item. Or the morphing blanket somewhere more in the middle. Look around there. There are some pretty neat morphing items to be found on that site.

     

     

     

    Ostadan said:

    I need something like a dropcloth, i.e., a thin plastic sheet that covers a floor, but is sort of crinkly in places, as a real such sheet would be.  A bump map on a plane would do (it's pretty much part of the background), but I don't have the technique even for that.

     

  • grylingrylin Posts: 278

    Still wishing for an updated version of INJ/REM tools  for ds 3 and ds 4, since it only works in daz studio 2 :O. i miss making my face morphs .

  • Tramp GraphicsTramp Graphics Posts: 2,412

    I'd love to find some domed cities, such as Sundari, the capitol of Mandalore:

    Interior: 

     

     

  • trikhon_8d763470dbtrikhon_8d763470db Posts: 54

    A few years ago,I downloaded a set of free adeptus astartes add on's for obiwans spacemarine,but I seem to have lost the mechanicus axe,what with hard disk crashs and moving and all,does anyone know if it's still available somewhere?

  • KeryaKerya Posts: 10,943
    trikhon_8d763470db said:

    A few years ago,I downloaded a set of free adeptus astartes add on's for obiwans spacemarine,but I seem to have lost the mechanicus axe,what with hard disk crashs and moving and all,does anyone know if it's still available somewhere?

    I am not sure - but you could look through these: https://poserdazfreebies.miraheze.org/wiki/Warhammer_40,000_Resources

     

  • edriver_191bd8488bedriver_191bd8488b Posts: 2
    Ostadan said:

    I need something like a dropcloth, i.e., a thin plastic sheet that covers a floor, but is sort of crinkly in places, as a real such sheet would be.  A bump map on a plane would do (it's pretty much part of the background), but I don't have the technique even for that.

    Meipe sells a set called Solitair (link: https://www.daz3d.com/solitaire-by-meipe ) that includes a sheet that lays on the floor.  You can make it out in the first and second promo pic.  It can be used separate from the bed and comforter. 

  • Ryselle-RyssaRyselle-Ryssa Posts: 146

    I'm searching for something simple... A 1 meter long cylinder with 2 cm in diameter (the geometric shape, not the hat ;-) ), rigged (10 elements at 10 cm), smoothed in weights and with an UV-Map. To use as rope, cable, tube, etc... depending on texture. Doesn't need to be 1 meter exactly, longer is ok, the rigging part is the interesting thing...

  • trikhon_8d763470dbtrikhon_8d763470db Posts: 54
    Kerya said:
    trikhon_8d763470db said:

    A few years ago,I downloaded a set of free adeptus astartes add on's for obiwans spacemarine,but I seem to have lost the mechanicus axe,what with hard disk crashs and moving and all,does anyone know if it's still available somewhere?

    I am not sure - but you could look through these: https://poserdazfreebies.miraheze.org/wiki/Warhammer_40,000_Resources

     

  • trikhon_8d763470dbtrikhon_8d763470db Posts: 54

    to kerya,thank you for the link, very helpful, sorry about the quote thingy, but the leave a comment box didn't show up until I left and came back three times, server is probably getting clogged up.

     

  • DollyGirlDollyGirl Posts: 2,656
    edited March 2019
    Ryselle-Ryssa said:

    I'm searching for something simple... A 1 meter long cylinder with 2 cm in diameter (the geometric shape, not the hat ;-) ), rigged (10 elements at 10 cm), smoothed in weights and with an UV-Map. To use as rope, cable, tube, etc... depending on texture. Doesn't need to be 1 meter exactly, longer is ok, the rigging part is the interesting thing...

    Jacky Brown has a cable freebie she used in the current March freebie contest, #12! MicCable Set by MDP. Look here: https://www.daz3d.com//forums/discussion/comment/4431956/#Comment_4431956 It comes in 2 meter and 3 meter lengths. Is not weight mapped. But will take shaders. Rigging is 33 sections on the 2 meter and 49 sections on the 3 meter. It does have a plug on one end. There are no usage restrictions on this freebie. There are several rope models that might work for you. You want to see things like rigged or ease pose in the descriptions to know that you are getting something with bones. You may just have to download the model and install before you know for sure what it is. Do a search on Rendo and ShareCg to find those models. Zippo has a rigged USB cord as well. It is 2 meters long. Rigged with 10 bones. Usage retrictions are unknown. Here:http://lab108.x0.com/lab108/electrical.html Scroll down. It is the fifth item on the page.

    Post edited by DollyGirl on
  • Ryselle-RyssaRyselle-Ryssa Posts: 146

    Perfect! heart

  • tomhbwctomhbwc Posts: 24

    Does anyone here know if Beavis and Butthead (the characters themselves) morphs exist for Michael 4 or any of the Genesis models? I'd like to do some fan animation to my Beavis and Butthead impressions, but I find DAZ Studio faster and higher quality to do animation in than trying to do 2D animation. Thanks in advance for any answers on the subject!

  • FWIWFWIW Posts: 320

    Does anyone know where I can find a webcam? Preferably like a newer rounded rectangle style but I am willing to work with what is available. 

  • Charlie JudgeCharlie Judge Posts: 12,754
    edited April 2019
    FWIW said:

    Does anyone know where I can find a webcam? Preferably like a newer rounded rectangle style but I am willing to work with what is available. 

    http://inlitestudio.com/3d/product/webcams/

    https://www.turbosquid.com/3d-models/free-3ds-model-webcam-vicam-3com/252932

     

     

    Post edited by Charlie Judge on
  • DoctorJellybeanDoctorJellybean Posts: 8,468
    edited April 2019

    Any digital alarm clocks around? Hopefully one with an adjustable time.

    Thanks

    Post edited by DoctorJellybean on
  • Charlie JudgeCharlie Judge Posts: 12,754
    edited April 2019
    DoctorJellybean said:

    Any digital alarm clocks around? Hopefully one with an adjustable time.

    Thanks

    https://www.renderosity.com/mod/freestuff/alarm-clock/75789

    https://www.renderosity.com/mod/freestuff/?item_id=23348

    https://www.cgtrader.com/free-3d-models/electronics/audio/alarm-clock-2a68ab6a-290e-415a-829b-dcbcf462e708

     

     

    Post edited by Charlie Judge on
  • DoctorJellybeanDoctorJellybean Posts: 8,468

    Thanks!

  • tkdroberttkdrobert Posts: 3,553

    New Ultramen.  The new Ultraman anime on Netflix has some new badass armor.  Would love to see someone tacle that.  I can kitbash something close with what I have but not quite.

  • tomhbwctomhbwc Posts: 24
    edited April 2019
    tomhbwc said:

    Does anyone here know if Beavis and Butthead (the characters themselves) morphs exist for Michael 4 or any of the Genesis models? I'd like to do some fan animation to my Beavis and Butthead impressions, but I find DAZ Studio faster and higher quality to do animation in than trying to do 2D animation. Thanks in advance for any answers on the subject!

    Well, since no one had an answer, I've taken matters into my own hands, and used morphs (and edited surfaces in the eyes and armani hair that comes with G8M) to make Butt-Head using G8M base figure. I've even just made Beavis, and edited this post to add him. If anyone knows how I can share the character preset (and wants to use this), let me know how to properly do so.

    Butt-Head_G8M-Iray-Base-v02.png
    1920 x 1080 - 2M
    Butt-Head_G8M-Iray-Base-v03.png
    1920 x 1080 - 918K
    Beavis_G8M-Iray-Base-MugShot-v01.png
    1920 x 1080 - 1M
    Beavis_G8M-Iray-Base-v01.png
    1920 x 1080 - 1M
    BeavisAndButtHead-DAZ-v01.png
    640 x 480 - 239K
    Post edited by tomhbwc on
  • launoklaunok Posts: 793
    tomhbwc said:
    tomhbwc said:

    Does anyone here know if Beavis and Butthead (the characters themselves) morphs exist for Michael 4 or any of the Genesis models? I'd like to do some fan animation to my Beavis and Butthead impressions, but I find DAZ Studio faster and higher quality to do animation in than trying to do 2D animation. Thanks in advance for any answers on the subject!

    Well, since no one had an answer, I've taken matters into my own hands, and used morphs (and edited surfaces in the eyes and armani hair that comes with G8M) to make Butt-Head using G8M base figure. I've even just made Beavis, and edited this post to add him. If anyone knows how I can share the character preset (and wants to use this), let me know how to properly do so.

    tomhbwc

    I am very interested!  Can you upload it for us please? smiley

  • launoklaunok Posts: 793

    I am sitting now for almost 2 days to get a simple sewing pattern style envelope to be textured.

    The only 1 that fits such an envelope is a model I got from Sketchup Warehouse.  I followed a YouTube video tut on how to texture it.  Front is working though but back is not picking up any textures.

    I got permission from Guy91600 at Rendo to use his clothing on images.  I want to use such envelopes in sewing shop renders, etc.

    Are there any free envelopes I can use for such patterns?

    Sample of mine attached.

    SEWING PATTERN SAMPLE1.jpg
    1200 x 563 - 424K
  • DollyGirlDollyGirl Posts: 2,656
    launok said:

    I am sitting now for almost 2 days to get a simple sewing pattern style envelope to be textured.

    The only 1 that fits such an envelope is a model I got from Sketchup Warehouse.  I followed a YouTube video tut on how to texture it.  Front is working though but back is not picking up any textures.

    I got permission from Guy91600 at Rendo to use his clothing on images.  I want to use such envelopes in sewing shop renders, etc.

    Are there any free envelopes I can use for such patterns?

    Sample of mine attached.

    I think that this bag will work. It does not have the traditional flap or the neat edges on it but it has some morphs and a template file included. It is here: https://www.renderosity.com/mod/freestuff/garden-black-soil-bags-and-splatter/62193. If you are working in DAZ Studio then you will need this handy script to get the morphs to work. https://www.daz3d.com/forums/discussion/222911/script-create-morphs-from-poser-pmd-files/p1. I have attached a jpg that shows the placement of my image on the template to get the image that you see in the sample. If I were going to want this to be more real I would use some deformers in DAZ Studio to straight out the top and bottom edges to make it more true to a pattern envelope. The original butterick pattern image was 1067 by 1688 pixels. I just put it on a layer on top of the template and scaled to size. Hope you can use it.

    sampletexture.png
    500 x 647 - 258K
    samplebagtemplate.jpg
    1024 x 784 - 103K
  • launoklaunok Posts: 793
    DollyGirl said:
    launok said:

    I am sitting now for almost 2 days to get a simple sewing pattern style envelope to be textured.

    The only 1 that fits such an envelope is a model I got from Sketchup Warehouse.  I followed a YouTube video tut on how to texture it.  Front is working though but back is not picking up any textures.

    I got permission from Guy91600 at Rendo to use his clothing on images.  I want to use such envelopes in sewing shop renders, etc.

    Are there any free envelopes I can use for such patterns?

    Sample of mine attached.

    I think that this bag will work. It does not have the traditional flap or the neat edges on it but it has some morphs and a template file included. It is here: https://www.renderosity.com/mod/freestuff/garden-black-soil-bags-and-splatter/62193. If you are working in DAZ Studio then you will need this handy script to get the morphs to work. https://www.daz3d.com/forums/discussion/222911/script-create-morphs-from-poser-pmd-files/p1. I have attached a jpg that shows the placement of my image on the template to get the image that you see in the sample. If I were going to want this to be more real I would use some deformers in DAZ Studio to straight out the top and bottom edges to make it more true to a pattern envelope. The original butterick pattern image was 1067 by 1688 pixels. I just put it on a layer on top of the template and scaled to size. Hope you can use it.

    DollyGirl,  thank you for this freebie link and idea.  Looks quite nice to use. smiley

  • DollyGirlDollyGirl Posts: 2,656

    You are most welcome Launok. Glad to help.

  • music2u4umusic2u4u Posts: 2,822
    tomhbwc said:
    tomhbwc said:

    Does anyone here know if Beavis and Butthead (the characters themselves) morphs exist for Michael 4 or any of the Genesis models? I'd like to do some fan animation to my Beavis and Butthead impressions, but I find DAZ Studio faster and higher quality to do animation in than trying to do 2D animation. Thanks in advance for any answers on the subject!

    Well, since no one had an answer, I've taken matters into my own hands, and used morphs (and edited surfaces in the eyes and armani hair that comes with G8M) to make Butt-Head using G8M base figure. I've even just made Beavis, and edited this post to add him. If anyone knows how I can share the character preset (and wants to use this), let me know how to properly do so.

    WOW...huh huh...He made us...huh huh ...cool!...................Shut up Bevis!

  • tkdroberttkdrobert Posts: 3,553

    Would love some Star Blazers uniforms.  You can see all of the uniforms human and alien here: https://ourstarblazers.com/vault/696/. ; I do have some textures for the classic (1970;s) male uniform, but I would like to see the 2199 uniforms.

  • KeryaKerya Posts: 10,943

    The only ones I know of are here: https://poserdazfreebies.miraheze.org/wiki/Uchū_Senkan_Yamato_Resources

Sign In or Register to comment.