Loading...
> >

The Ultimate Super-Hero Freebie List!

1…1213151718…21

Comments

  • tkdroberttkdrobert Posts: 3,562
    edited January 2018

    I posted this in the wrong thread.

    Post edited by tkdrobert on
  • OrionPax09OrionPax09 Posts: 419

    Recently finished costumes for Namorita of Marvel Comics. One for G2F, the other for G3F.

    https://www.sharecg.com/v/90397/view/5/3D-Model/Namorita-Cosplay-for-Genesis-2-Females

    https://www.sharecg.com/v/90398/view/5/3D-Model/Namorita-Cosplay-for-Genesis-3-Females

  • tkdroberttkdrobert Posts: 3,562
    OrionPax09 said:

    Recently finished costumes for Namorita of Marvel Comics. One for G2F, the other for G3F.

    https://www.sharecg.com/v/90397/view/5/3D-Model/Namorita-Cosplay-for-Genesis-2-Females

    https://www.sharecg.com/v/90398/view/5/3D-Model/Namorita-Cosplay-for-Genesis-3-Females

    I think you should put those in the DAZ Section.  Thanks you for the costumes.

  • OrionPax09OrionPax09 Posts: 419
    tkdrobert said:
    OrionPax09 said:

    Recently finished costumes for Namorita of Marvel Comics. One for G2F, the other for G3F.

    https://www.sharecg.com/v/90397/view/5/3D-Model/Namorita-Cosplay-for-Genesis-2-Females

    https://www.sharecg.com/v/90398/view/5/3D-Model/Namorita-Cosplay-for-Genesis-3-Females

    I think you should put those in the DAZ Section.  Thanks you for the costumes.

    Actually, I tried to put them in the DAZ Section. But when I started uploading, there was a glitch, and it switched over to 3D Models. It happens most of the time I try and upload something. Still, glad you like the costumes. I have more on the way.

  • tkdroberttkdrobert Posts: 3,562
    OrionPax09 said:
    tkdrobert said:
    OrionPax09 said:

    Recently finished costumes for Namorita of Marvel Comics. One for G2F, the other for G3F.

    https://www.sharecg.com/v/90397/view/5/3D-Model/Namorita-Cosplay-for-Genesis-2-Females

    https://www.sharecg.com/v/90398/view/5/3D-Model/Namorita-Cosplay-for-Genesis-3-Females

    I think you should put those in the DAZ Section.  Thanks you for the costumes.

    Actually, I tried to put them in the DAZ Section. But when I started uploading, there was a glitch, and it switched over to 3D Models. It happens most of the time I try and upload something. Still, glad you like the costumes. I have more on the way.

    That explains a lot LOL!  Looking forward to your new items.

  • magicjavamagicjava Posts: 152
    edited January 2018

    Hi guys! I've just uploaded some Kibry Krackle obj files to my Google drive. They're free to use, with no liscensing restrictions. I hereby place them in the public domain, which means you can do whatever you want with them.

    Here's a sample image using the Krackle. 

     

    Post edited by magicjava on
  • magicjavamagicjava Posts: 152
    edited January 2018

    Here's another picture done in DAZ Studio using only models available in my Kirby Krackle download. No postwork (except to add word balloons).

    Post edited by magicjava on
  • OrionPax09OrionPax09 Posts: 419
    magicjava said:

    Hi guys! I've just uploaded some Kibry Krackle obj files to my Google drive. They're free to use, with no liscensing restrictions. I hereby place them in the public domain, which means you can do whatever you want with them.

    Here's a sample image using the Krackle. 

     

    Great idea! But if you don't mind me giving advice, you could just as easily set up a ShareCG account make your Kirby Krackle available over there.

  • OrionPax09OrionPax09 Posts: 419

    Just wrapped up a Killer Frost costume for G2F and G3F, as well as Iray textures for both versions. The costume is based on the version of Killer Frost from DC Universe Online.

  • SkelchSkelch Posts: 275
    magicjava said:

    Here's another picture done in DAZ Studio using only models available in my Kirby Krackle download. No postwork (except to add word balloons).

    Thank you my daughter has to create comic book for a class in college and she will be thrilled to see this is now availible. 

     

  • OrionPax09OrionPax09 Posts: 419

    Recently completed a new Juggernaut costume. It's rigged for Genesis 2 Male(s) and Genesis 3 Male(s).

  • Geminii23Geminii23 Posts: 1,327

    Anyone know where I might be able to find a chest harness for the classic blue and yellow cyclops outfit?  I have seen a few renders including some done in DAZ, but have been unsuccessful in finding anything out there that might work.

    Thanks

  • SixDsSixDs Posts: 2,384

    Well it might take a little kitbashing and modding, but you could look at Gary Childress' various suspenders here:

    http://www.sharecg.com/pf/full_uploads.php?pf_user_name=garychildress

  • BrianP21361BrianP21361 Posts: 812
    OrionPax09 said:

    Recently completed a new Juggernaut costume. It's rigged for Genesis 2 Male(s) and Genesis 3 Male(s).

    Great Juggernaught costume OrionPax09. I downloaded it and tried to bring it into both Daz Studio and also Carrara and get an error message "...OpJggr_Helmet.dsf" could not be found. I get the same error message when I try to load all your costumes. Any idea what's going on?

    Thanks,

    Brian

    Screen Shot 2018-02-04 at 2.25.15 PM.png
    743 x 120 - 28K
    Screen Shot 2018-02-04 at 2.28.19 PM.png
    452 x 303 - 27K
  • OrionPax09OrionPax09 Posts: 419
    BrianP21361 said:
    OrionPax09 said:

    Recently completed a new Juggernaut costume. It's rigged for Genesis 2 Male(s) and Genesis 3 Male(s).

    Great Juggernaught costume OrionPax09. I downloaded it and tried to bring it into both Daz Studio and also Carrara and get an error message "...OpJggr_Helmet.dsf" could not be found. I get the same error message when I try to load all your costumes. Any idea what's going on?

    Thanks,

    Brian

    Really? I don't know what the problem could be. I mean, I have sent my costumes out to be tested in order to avoid problems like this happening, and this has never been reported. I even doublechecked the data files for that particular costume, and found the file you're missing without any problem. And when I did a test download of the ZIP files and extracted everything, I was able to find the mentioned file without any difficulty. And everything is working fine on my computer.

    And you say this is a recurring problem with all of my costumes?

     

    Helmet.PNG
    1059 x 668 - 57K
  • OrionPax09OrionPax09 Posts: 419
    BrianP21361 said:
    OrionPax09 said:

    Recently completed a new Juggernaut costume. It's rigged for Genesis 2 Male(s) and Genesis 3 Male(s).

    Great Juggernaught costume OrionPax09. I downloaded it and tried to bring it into both Daz Studio and also Carrara and get an error message "...OpJggr_Helmet.dsf" could not be found. I get the same error message when I try to load all your costumes. Any idea what's going on?

    Thanks,

    Brian

    Really? I don't know what the problem could be. I mean, I have sent my costumes out to be tested in order to avoid problems like this happening, and this has never been reported. I even doublechecked the data files for that particular costume, and found the file you're missing without any problem. And when I did a test download of the ZIP files and extracted everything, I was able to find the mentioned file without any difficulty. And everything is working fine on my computer.

    And you say this is a recurring problem with all of my costumes?

     

  • OrionPax09OrionPax09 Posts: 419
    tkdrobert said:
    OrionPax09 said:
    tkdrobert said:
    OrionPax09 said:

    Recently finished costumes for Namorita of Marvel Comics. One for G2F, the other for G3F.

    https://www.sharecg.com/v/90397/view/5/3D-Model/Namorita-Cosplay-for-Genesis-2-Females

    https://www.sharecg.com/v/90398/view/5/3D-Model/Namorita-Cosplay-for-Genesis-3-Females

    I think you should put those in the DAZ Section.  Thanks you for the costumes.

    Actually, I tried to put them in the DAZ Section. But when I started uploading, there was a glitch, and it switched over to 3D Models. It happens most of the time I try and upload something. Still, glad you like the costumes. I have more on the way.

    That explains a lot LOL!  Looking forward to your new items.

    Believe me, if I knew how to change categories after this happens back to DAZ, then I'd gladly do so. But I have no idea. As far as I can, categories are locked after submission.

    Any suggestions?

  • BrianP21361BrianP21361 Posts: 812
    edited February 2018
    OrionPax09 said:
    BrianP21361 said:
    OrionPax09 said:

    Recently completed a new Juggernaut costume. It's rigged for Genesis 2 Male(s) and Genesis 3 Male(s).

    Great Juggernaught costume OrionPax09. I downloaded it and tried to bring it into both Daz Studio and also Carrara and get an error message "...OpJggr_Helmet.dsf" could not be found. I get the same error message when I try to load all your costumes. Any idea what's going on?

    Thanks,

    Brian

    Really? I don't know what the problem could be. I mean, I have sent my costumes out to be tested in order to avoid problems like this happening, and this has never been reported. I even doublechecked the data files for that particular costume, and found the file you're missing without any problem. And when I did a test download of the ZIP files and extracted everything, I was able to find the mentioned file without any difficulty. And everything is working fine on my computer.

    And you say this is a recurring problem with all of my costumes?

     

    Yes. I've had the same issue with the two Stunner costumes, Namorita and the Silver Surfer Board. I've seen this issue before and sometimes I can find a work around. No luck with Juggernaught so far. I've double checked and I have all the files and they are in the folders you showed. It just can't find them when I try to load them. I'm not well versed with this, but it might have something to do with relative paths verses absolute. What's the top level folder that I should put your products in?

    Post edited by BrianP21361 on
  • OrionPax09OrionPax09 Posts: 419
    BrianP21361 said:
    OrionPax09 said:
    BrianP21361 said:
    OrionPax09 said:

    Recently completed a new Juggernaut costume. It's rigged for Genesis 2 Male(s) and Genesis 3 Male(s).

    Great Juggernaught costume OrionPax09. I downloaded it and tried to bring it into both Daz Studio and also Carrara and get an error message "...OpJggr_Helmet.dsf" could not be found. I get the same error message when I try to load all your costumes. Any idea what's going on?

    Thanks,

    Brian

    Really? I don't know what the problem could be. I mean, I have sent my costumes out to be tested in order to avoid problems like this happening, and this has never been reported. I even doublechecked the data files for that particular costume, and found the file you're missing without any problem. And when I did a test download of the ZIP files and extracted everything, I was able to find the mentioned file without any difficulty. And everything is working fine on my computer.

    And you say this is a recurring problem with all of my costumes?

     

    Yes. I've had the same issue with the two Stunner costumes, Namorita and the Silver Surfer Board. I've seen this issue before and sometimes I can find a work around. No luck with Juggernaught so far. I've double checked and I have all the files and they are in the folders you showed. It just can't find them when I try to load them. I'm not well versed with this, but it might have something to do with relative paths verses absolute. What's the top level folder that I should put your products in?

    After going into the Content folder, you just move all of the folders into My Library.

  • BrianP21361BrianP21361 Posts: 812
    OrionPax09 said:
    After going into the Content folder, you just move all of the folders into My Library.

    I tried putting everything into My Library and i got the same error. My folder structure is attached. do you see anything unusual with it?

    Screen Shot 2018-02-04 at 9.18.28 PM.png
    1066 x 1364 - 527K
  • OrionPax09OrionPax09 Posts: 419
    BrianP21361 said:
    OrionPax09 said:
    After going into the Content folder, you just move all of the folders into My Library.

    I tried putting everything into My Library and i got the same error. My folder structure is attached. do you see anything unusual with it?

    Um...when you say, you tried putting "everything" into My Library...you didn't, by any chance, also put the Content Folder in as well, did you?

  • BrianP21361BrianP21361 Posts: 812

    Well, yes. i created a new folder called My Library and put everything in it. I manually added My Library in Studio. I've attached another screen shot. am I doing something wrong?

    Screen Shot 2018-02-04 at 9.53.51 PM.png
    812 x 715 - 265K
  • OrionPax09OrionPax09 Posts: 419
    BrianP21361 said:

    Well, yes. i created a new folder called My Library and put everything in it. I manually added My Library in Studio. I've attached another screen shot. am I doing something wrong?

    I believe that I just found the problem. You see, because you added the Content folder into My Library, the resulting folder heirarchy becomes Content/data/OrionPax09/Juggernaut Cosplay for G3M/OPJggr_Helmet/OPJggr_Helmet.dsf. If I'm right, then the problem is that you created an extra level in the layer heirarchy, throwing the rest of it off.

  • BrianP21361BrianP21361 Posts: 812
    OrionPax09 said:

    I believe that I just found the problem. You see, because you added the Content folder into My Library, the resulting folder heirarchy becomes Content/data/OrionPax09/Juggernaut Cosplay for G3M/OPJggr_Helmet/OPJggr_Helmet.dsf. If I'm right, then the problem is that you created an extra level in the layer heirarchy, throwing the rest of it off.

    That was it! I added the runtime at the Content level and now I can import all of your costumes. Thanks so much for all your help!!!

  • OrionPax09OrionPax09 Posts: 419
    BrianP21361 said:
    OrionPax09 said:

    I believe that I just found the problem. You see, because you added the Content folder into My Library, the resulting folder heirarchy becomes Content/data/OrionPax09/Juggernaut Cosplay for G3M/OPJggr_Helmet/OPJggr_Helmet.dsf. If I'm right, then the problem is that you created an extra level in the layer heirarchy, throwing the rest of it off.

    That was it! I added the runtime at the Content level and now I can import all of your costumes. Thanks so much for all your help!!!

    Glad to hear everything worked out. When you get around to using my stuff, I wouldn't mind seeing what you come up with.

  • BrianP21361BrianP21361 Posts: 812

    OrionPax09,

    This is an amazing costume.Thanks very much for sharing. I've attached a few WIPs so you can see how I'm using it. I'm not sure which body I like best. Juggernaught is usually drawn very big, but he seems too bulky in the last two images. Rendered in Carrara.

    Juggernaught Bodybuilder Hammered Copper.png
    1200 x 900 - 252K
    Juggernaught Rage.png
    1200 x 900 - 296K
    Juggernaught Stocky.png
    1200 x 900 - 282K
    Juggernaught Rage Stocky.png
    1200 x 900 - 321K
  • OrionPax09OrionPax09 Posts: 419
    edited February 2018
    BrianP21361 said:

    OrionPax09,

    This is an amazing costume.Thanks very much for sharing. I've attached a few WIPs so you can see how I'm using it. I'm not sure which body I like best. Juggernaught is usually drawn very big, but he seems too bulky in the last two images. Rendered in Carrara.

    I'm glad you like it. Just so you and everyone else knows, I've recently completed Iray presets for this costume. Check out Juggernaut Cosplay - 3Delight and Iray Presets.

    Post edited by OrionPax09 on
  • OrionPax09OrionPax09 Posts: 419
    BrianP21361 said:

    OrionPax09,

    This is an amazing costume.Thanks very much for sharing. I've attached a few WIPs so you can see how I'm using it. I'm not sure which body I like best. Juggernaught is usually drawn very big, but he seems too bulky in the last two images. Rendered in Carrara.

    I'm glad you like it. Just so you and everyone else knows, I've recently completed Iray presets for this costume. Check out Juggernaut Cosplay - 3Delight and Iray Presets.

  • Max_theHitmanMax_theHitman Posts: 66
    edited February 2018

     

    Super post!

    Thank you so much!

     

    Post edited by Max_theHitman on
  • Geminii23Geminii23 Posts: 1,327
    OrionPax09 said:
    BrianP21361 said:

    OrionPax09,

    This is an amazing costume.Thanks very much for sharing. I've attached a few WIPs so you can see how I'm using it. I'm not sure which body I like best. Juggernaught is usually drawn very big, but he seems too bulky in the last two images. Rendered in Carrara.

    I'm glad you like it. Just so you and everyone else knows, I've recently completed Iray presets for this costume. Check out Juggernaut Cosplay - 3Delight and Iray Presets.

    Wow!  This looks awesome.  Instant download!   Thanks

Sign In or Register to comment.