General Freebie Requests

katieshelby19_94b3323faf

anyone know where i can find Victoria 4 or 5 for free? if not thats fine, thanks

DollyGirl

ThinMick said:

Anyone know where I can find a flamenco dancer's dress? Preferably for V4, but CrossDresser and I can have a conversation with anything you can come up with.

I don't know of any free dresses but you could do some kit basing and come up with something. This was what I found:

skirt (Gothic for V4):
http://www.sharecg.com/v/54529/gallery/11/Poser/Gothic-for-V4-*New*

bodice and sleeves Rococo for V4):
http://forumarchive.daz3d.com/viewtopic.php?t=106182&postdays=0&postorder=asc&start=0&sid=67e25b2f4ff005edf79c0f5de0a6c00f

For the scarf I would use the Fortune Teller for the 1930 dress:

http://www.daz3d.com/shop/fortune-teller-1930-for-v4

You will have to do some trans maps or redo object mapping which 4.5 Pro can do to make the pieces go together more easily. Here is Cho's tut on texturing and transmap creation:
http://chohole.ovbi.org/texture_tutorial.htm
Just an idea.

Chohole

elvisfan20 said:

anyone know where i can find Victoria 4 or 5 for free? if not thats fine, thanks

Simple answer to that one is that you will not find either V4 or V5 for free. THey are both DAZ 3D products, and can only be bought from the DAZ 3D strore.

And never let anyone tell you any different.

katieshelby19_94b3323faf

okay thanks y'all been a big help

DollyGirl

elvisfan20 said:

okay thanks y'all been a big help

DAZ still allows c|net to carry the gen three figures. There is lots of stuff for them.

http://download.cnet.com/Poser-DAZStudio-3D-Models-Pack/3000-6677_4-10579249.html

mjc1016

chohole said:

elvisfan20 said:

anyone know where i can find Victoria 4 or 5 for free? if not thats fine, thanks

Simple answer to that one is that you will not find either V4 or V5 for free. THey are both DAZ 3D products, and can only be bought from the DAZ 3D strore.

And never let anyone tell you any different.

Not quite true...V5 was available, a couple of months back, on the DVD included with 3DArtist magazine...issue #43, I think, so if you can find a print back issue with the disk, you can get if for free. Keep an eye out on the various mags...Digital Arts, 3D Artist and 3D World, because every so often things do show up on the disks.

katieshelby19_94b3323faf

thanks everyone:)

carrie58

ThinMick said:

Anyone know where I can find a flamenco dancer's dress? Preferably for V4, but CrossDresser and I can have a conversation with anything you can come up with.

If you are a PC member you could get the flamenco dress for V3 for 1.99

patience55

mjc1016 said:

chohole said:

elvisfan20 said:

anyone know where i can find Victoria 4 or 5 for free? if not thats fine, thanks

Simple answer to that one is that you will not find either V4 or V5 for free. THey are both DAZ 3D products, and can only be bought from the DAZ 3D strore.

And never let anyone tell you any different.

Not quite true...V5 was available, a couple of months back, on the DVD included with 3DArtist magazine...issue #43, I think, so if you can find a print back issue with the disk, you can get if for free. Keep an eye out on the various mags...Digital Arts, 3D Artist and 3D World, because every so often things do show up on the disks.

That's correct [although at about $20 per mag, not exactly free lol ...] What I wanted to mention though is that people might still find references to free models such as V4 because "once upon a time" they were free. While that offer has since been closed, sales abound throughout the year.

robkelk

Dollygirl said:

robkelk said:

I suspect I already have this somewhere in my collection, but I can't seem to find it...

I need a wavy "pageboy" cut hairdo for V4, preferably already with a ginger-red MAT.

(It would be really, really nice if we could put images into the posts instead of just at the end, and if there were images in the Free Hair and Hair related Items List...)

Wave hair
http://digitalbabes.jp/
V4 fit and more textures
http://www.sharecg.com/v/43471/View/11/Poser/JL-Koz-Wave-Hair---Geometry-correction-+-15-shades

Thanks, Dlollygirl!

(I did have all of Koz' hairdos - not installed, though - but I didn't have the V4 fit.)

Tramp Graphics

Dollygirl said:

robkelk said:

I suspect I already have this somewhere in my collection, but I can't seem to find it...

I need a wavy "pageboy" cut hairdo for V4, preferably already with a ginger-red MAT.

(It would be really, really nice if we could put images into the posts instead of just at the end, and if there were images in the Free Hair and Hair related Items List...)

Wave hair
http://digitalbabes.jp/
V4 fit and more textures
http://www.sharecg.com/v/43471/View/11/Poser/JL-Koz-Wave-Hair---Geometry-correction-+-15-shadesIs there a V4 fit for the Koz Long hair? I looked for one but couldn't find it. Too bad someone can't make full on Genesis fits for these hair figures.

mjc1016

Tramp Graphics said:

Dollygirl said:

robkelk said:

I suspect I already have this somewhere in my collection, but I can't seem to find it...

I need a wavy "pageboy" cut hairdo for V4, preferably already with a ginger-red MAT.

(It would be really, really nice if we could put images into the posts instead of just at the end, and if there were images in the Free Hair and Hair related Items List...)

Wave hair
http://digitalbabes.jp/
V4 fit and more textures
http://www.sharecg.com/v/43471/View/11/Poser/JL-Koz-Wave-Hair---Geometry-correction-+-15-shades

Is there a V4 fit for the Koz Long hair? I looked for one but couldn't find it. Too bad someone can't make full on Genesis fits for these hair figures.

Actually, they are pretty easy to convert to Genesis.

If you don't have the Gen3 shapes, then using a Gen4 fit before converting by the instructions in this thread, works very well.

http://www.daz3d.com/forums/discussion/1866/

Tramp Graphics

I do a lot of that already. But it really doesn't work if you don't have the V4 fit to begin with.

DollyGirl

I have a question. I am installing the outfit as pictured in the image below but the boots do not have a dsf file in the People/Genesis/Clothing/J_Shirt directory. There are files for the boots in the data directory. Anybody have any ideas how to create, obtain this file? The readme does not have the creator's contact information and it says there will be no support. Got any ideas?
Lonnie

patience55

Dollygirl said:

I have a question. I am installing the outfit as pictured in the image below but the boots do not have a dsf file in the People/Genesis/Clothing/J_Shirt directory. There are files for the boots in the data directory. Anybody have any ideas how to create, obtain this file? The readme does not have the creator's contact information and it says there will be no support. Got any ideas?
Lonnie

This is a freebie? Link please ....

DollyGirl

Patience55 said:

Dollygirl said:

I have a question. I am installing the outfit as pictured in the image below but the boots do not have a dsf file in the People/Genesis/Clothing/J_Shirt directory. There are files for the boots in the data directory. Anybody have any ideas how to create, obtain this file? The readme does not have the creator's contact information and it says there will be no support. Got any ideas?
Lonnie

This is a freebie? Link please ....

I would if I could Patience but I have no clue where I got the file. It is a Japaneese artist but I don't know their handle. This is the file name:
Genesis_Boots_Top_Pants.zip and the readme has no details. I downloaded the file on Dec 26 2011. Anybody else have more information?

SteveM17

I'm looking for spaceship interiors/cockpits. NOT one's based on copyrighted stuff (Star Wars, Star Trek etc) please.

Kerya

SteveM17 said:

I'm looking for spaceship interiors/cockpits. NOT one's based on copyrighted stuff (Star Wars, Star Trek etc) please.

http://www.renderosity.com/mod/freestuff/details.php?item_id=68769
http://www.sharecg.com/v/63187/gallery/5/3D-Model/Multi-Purpose-Shuttle-MPS2A-Beaver-.obj-version

LuckBe

I'm trying to find rustic or medieval style farm tools- shovels, pitchfork, bales of hay, and especially a water trough and a wooden bucket. Rustic fencing would be a plus as well! If anyone knows where I could find such things you'd make my week! :D

Kerya

Hay bales
http://www.renderosity.com/mod/freestuff/details.php?item_id=69053
http://fast3d.co.uk/barn/barn.htm
http://forum.runtimedna.com/downloads.php?do=file&id=385

Kerya

Fork
http://www.buckrogers.demon.co.uk/3d/3d.htm (and shovel)
http://www.greylight.com/posermisc.html

horse-drawn rake
http://www.sharecg.com/v/20020/View/5/3D-Model/Horse-drawn-rake

shovel
http://www.sharecg.com/v/46582/View/5/3D-Model/Shovel
http://www.sharecg.com/v/2614/View/5/3D-Model/Shovel-Collection
http://www.amazing3d.com/free/free.shtml

Kerya

Bucket
http://www.sharecg.com/v/35967/View/5/3D-Model/Ancient-Bucket-(OBJ)
http://www.renderosity.com/mod/freestuff/details.php?item_id=59321
not wooden, but rusty:
http://www.khiba.com/3DBP/models.htm

Couldn't find a trough ...

LuckBe

Yaaay, you are wonderful, thank you so much!

patience55

http://www.turbosquid.com/FullPreview/Index.cfm/ID/333094 3ds/lwo water trough

mjc1016

I have a stone sink

http://www.sharecg.com/v/56956/gallery/21/DAZ-Studio/Stone-Sink

You can remove the stand and drain and use it as a water trough.

LuckBe

I retextured the turbosquid one and it looks like it'll work- I can use the sink, too, for a different render. Thanks again!

Turbosquid trough after a little love- cleans up pretty well!

Serene Night

Has anyone seen any ocean fish which are daz compatible and not NOR non-commercial use only?

patience55

ladychance said:

I retextured the turbosquid one and it looks like it'll work- I can use the sink, too, for a different render. Thanks again!

Turbosquid trough after a little love- cleans up pretty well!

Nice! Amazing what a little TLC will do.

SteveM17

Kerya said:

SteveM17 said:

I'm looking for spaceship interiors/cockpits. NOT one's based on copyrighted stuff (Star Wars, Star Trek etc) please.

http://www.renderosity.com/mod/freestuff/details.php?item_id=68769
http://www.sharecg.com/v/63187/gallery/5/3D-Model/Multi-Purpose-Shuttle-MPS2A-Beaver-.obj-version

Works well, thanks, I shall certainly be using this.

Are there any big spaceship interiors as well out there, rather than small craft?

EDIT: I found some of the stuff I was looking for by accident, here is the site for anyone wanting similar: http://www.shadowy.de/modelle/modelle_start.html

DollyGirl

SereneNight said:

Has anyone seen any ocean fish which are daz compatible and not NOR non-commercial use only?

Did you try this page?
http://www.planit3d.com/source/meshes_files/aquatics01.html