Loading...
> >

Anyone have use for an old-style hypo syringe?

AllenArtAllenArt Posts: 7,169
edited November 2021 in Freebies

If so, I'll drop it in my ShareCG freebies tomorrow.

Old Style Syringe.png
1000 x 1000 - 629K
Post edited by AllenArt on

Comments

  • richardandtracyrichardandtracy Posts: 5,739

    That would be useful. With one in the library I'd think of a use for it.

    Regards,

    Richard

  • LeanaLeana Posts: 11,783

    It looks great :)

  • ankromtankromt Posts: 64

    Cool! I am sure that I can find a use for this.

  • nabob21nabob21 Posts: 1,004

    Aaaarrrrghh!. I just had a flashback to my old dentist's office when I was a kid. He used a needle like that to administer the freezing and it used to scare the crap out of me! laugh I'm sure that I can find a use for it in any evil dentist/doctor/mad scientist horror render I make.

  • 3WC3WC Posts: 1,110

    Looks like it is well modelled, would be useful. :)

  • JackyBrownJackyBrown Posts: 585

    Oooowww yes! Please. Very, very useful...

  • McGyverMcGyver Posts: 7,058

    That's really good looking, and accurate too. Great work!

  • Joe2018Joe2018 Posts: 255

    Looks great. I like to get it.

  • AllenArtAllenArt Posts: 7,169
    edited November 2021

    Ok then, I'll pack it up and put it on the ShareCG page later tonight or tomorrow at the latest.

    The plunger plunges and the liquid morphs down, but they're two separate operations (plunger is translation and liquid is a morph). The prop loads with the hand pose in G8M's right hand. It's a wearable preset composed of the plunger parented to the barrel in a group. I'll post here when I have it up. Cross your fingers I do it right the first time....been awhile since I've done and put up a freebie. LOL

    It's up:

     https://sharecg.com/v/98467/gallery/21/DAZ-Studio/Old-Style-Syringe

    Post edited by AllenArt on
  • manekiNekomanekiNeko Posts: 1,408

    AllenArt said:

    Ok then, I'll pack it up and put it on the ShareCG page later tonight or tomorrow at the latest.

    The plunger plunges and the liquid morphs down, but they're two separate operations (plunger is translation and liquid is a morph). The prop loads with the hand pose in G8M's right hand. It's a wearable preset composed of the plunger parented to the barrel in a group. I'll post here when I have it up. Cross your fingers I do it right the first time....been awhile since I've done and put up a freebie. LOL

    It's up:

     https://sharecg.com/v/98467/gallery/21/DAZ-Studio/Old-Style-Syringe

    just saw this on newest stuff on sharecg, remembered there was a thread title about it here... it looks absolutely awesome, great ornamented design! such neat precise beautiful work! you never stop surpassing yourself ^^

    now a question: you mentioned DS 4.16, i'm still hung on 4.11 - maybe 4.14 soon if i can find a solution with support (lame laptop, need 4.9 also etc) - what happens if someone doesn't use 4.16 (yet.. or ever)? 

  • AllenArtAllenArt Posts: 7,169

    manekiNeko said:

    AllenArt said:

    Ok then, I'll pack it up and put it on the ShareCG page later tonight or tomorrow at the latest.

    The plunger plunges and the liquid morphs down, but they're two separate operations (plunger is translation and liquid is a morph). The prop loads with the hand pose in G8M's right hand. It's a wearable preset composed of the plunger parented to the barrel in a group. I'll post here when I have it up. Cross your fingers I do it right the first time....been awhile since I've done and put up a freebie. LOL

    It's up:

     https://sharecg.com/v/98467/gallery/21/DAZ-Studio/Old-Style-Syringe

    just saw this on newest stuff on sharecg, remembered there was a thread title about it here... it looks absolutely awesome, great ornamented design! such neat precise beautiful work! you never stop surpassing yourself ^^

    now a question: you mentioned DS 4.16, i'm still hung on 4.11 - maybe 4.14 soon if i can find a solution with support (lame laptop, need 4.9 also etc) - what happens if someone doesn't use 4.16 (yet.. or ever)? 

    The shaders are nothing special. Nothing that 4.14 certainly didn't have, tho I have no idea if anything was changed with them behind the scenes. I don't know why it wouldn't work for you, I just had to put 4.16+ on there because that's what I set it up in and haven't tested it in any other version ;). Let us know if it works for ya! :) 

  • richardandtracyrichardandtracy Posts: 5,739
    You are very kind, thank you. Your jewellery props are ones I have in the scene subset loads of my most used characters, wouldn't want to be without them. Much appreciated.
  • AllenArtAllenArt Posts: 7,169

    richardandtracy said:

    You are very kind, thank you. Your jewellery props are ones I have in the scene subset loads of my most used characters, wouldn't want to be without them. Much appreciated.

    Aww, that's nice to hear, always. :)

    Stay tuned. There's a sorta-Christmas-y set of earrings coming up soon. I just have to put the finishing touches on them and I'm lazy. LOL laugh

  • AllenArtAllenArt Posts: 7,169
    edited November 2021

    One note on the syringe: I thought before I saved it that I'd added sub-d to the prop, but I apparently had not. If you want to render it up close, you might want to add 1 level of sub-d. That should be sufficient, otherwise it might look a little jaggy and/or lumpy ;). Farther away, you probably won't notice.

     

    Post edited by AllenArt on
  • BronzeDragonBronzeDragon Posts: 381

    Thank you very much. Not sure where I'll use it, but I expect I'll find something.

     

    As a side note, thanks for all the freebies you've done over the years, especially for the shaders (Iuse them alot).

  • manekiNekomanekiNeko Posts: 1,408

    AllenArt said:

    manekiNeko said:

    AllenArt said:

    Ok then, I'll pack it up and put it on the ShareCG page later tonight or tomorrow at the latest.

    The plunger plunges and the liquid morphs down, but they're two separate operations (plunger is translation and liquid is a morph). The prop loads with the hand pose in G8M's right hand. It's a wearable preset composed of the plunger parented to the barrel in a group. I'll post here when I have it up. Cross your fingers I do it right the first time....been awhile since I've done and put up a freebie. LOL

    It's up:

     https://sharecg.com/v/98467/gallery/21/DAZ-Studio/Old-Style-Syringe

    just saw this on newest stuff on sharecg, remembered there was a thread title about it here... it looks absolutely awesome, great ornamented design! such neat precise beautiful work! you never stop surpassing yourself ^^

    now a question: you mentioned DS 4.16, i'm still hung on 4.11 - maybe 4.14 soon if i can find a solution with support (lame laptop, need 4.9 also etc) - what happens if someone doesn't use 4.16 (yet.. or ever)? 

    The shaders are nothing special. Nothing that 4.14 certainly didn't have, tho I have no idea if anything was changed with them behind the scenes. I don't know why it wouldn't work for you, I just had to put 4.16+ on there because that's what I set it up in and haven't tested it in any other version ;). Let us know if it works for ya! :) 

    works like a charm! shaders, morphs, all. thanks a lot ^^

    and now, i feel so eeeeevil * said with Vile's voice (Reincarnation flash game) *

  • richardandtracyrichardandtracy Posts: 5,739
    edited December 2021

    Just saw a new product being advance warned in the 'Commercial' forum, 'Mad Scientist', and my first thought was the promo image would be much better with your hyperdemic nurdle than the one that's there.

    ETA: Oh. I see. It was that one that inspired you to create it. Maybe you could offer it to the PA? It's so much better.

    Post edited by richardandtracy on
  • Sky77Sky77 Posts: 820

    this looks fantastic!  Thank you!

     

  • AllenArtAllenArt Posts: 7,169

    richardandtracy said:

    Just saw a new product being advance warned in the 'Commercial' forum, 'Mad Scientist', and my first thought was the promo image would be much better with your hyperdemic nurdle than the one that's there.

    ETA: Oh. I see. It was that one that inspired you to create it. Maybe you could offer it to the PA? It's so much better.

    I'm SURE the PA can do better than I can...lol. Besides, I have no idea if that hypo comes with the morph or not ;). I have no idea where it's from. LOL 

  • AllenArtAllenArt Posts: 7,169

    Sky77 said:

    this looks fantastic!  Thank you!

     

    You're welcome :) 

  • Faeryl WomynFaeryl Womyn Posts: 3,642

    This looks great, thanks bunches for it.

  • TorquinoxTorquinox Posts: 3,388
    edited December 2021

    I grabbed it off Rendo. Thanks for sharing. It does look pretty cool! :)

    Post edited by Torquinox on
  • AllenArtAllenArt Posts: 7,169

    Torquinox said:

    I grabbed it off Rendo. Thanks for sharing. It does look pretty cool! :)

    Thanks :) 

  • richardandtracyrichardandtracy Posts: 5,739
    And the modern version too. Impressive.
  • medievalpiratemedievalpirate Posts: 46

    Really nice, any chance of a bigger fatter needle, add-on, for those 'i really what to scare you moments'.

  • markusmaternmarkusmatern Posts: 559

    AllenArt said:

    If so, I'll drop it in my ShareCG freebies tomorrow.

     

    Thank you very much! Your syringe freebie is really great! I used it here:

Sign In or Register to comment.