Released: Face Morph Kit for Genesis 8 Male + MR (commercial)
SF-Design
Posts: 986
Special Discounts Available for a limited time
https://www.daz3d.com/06-19-bathroom-bundle
This face morph resource kit consists of 90 morphs to alter the face of Genesis 8 Male based characters.
Make your characters more unique. All sections of the face are covered.
Several face presets are included as well. Use them as a base for further adjustments or as they are.
Whether you want only subtle changes or more intense ones. It can be done with this product.
All morphs are dial controlled and can be individually dialed in and combined (also with morphs from other products) to get the results you want. You can just adjust the default Genesis 8 Male Base Character's Face or also adjust other characters to make them more unique.
There are almost endless possibilities to adjust the face. In the promos we show some usage samples. All are created using the default Genesis 8 Male Base Character (without any other morphs used).
Since this product is also a Merchant Resource you can even use it to create your own custom face morphs / shapes to be used in your commercial products. Please refer to the Readme for Merchant Resource usage terms.
- Face Morph Kit for Genesis 8 Male: (.DUF)
- Morphs:
- Ears:
- Ears Angle
- Earlobes Length
- Ears Left / Right
- Ears Rotation
- Ears Size
- Ears Up / Down
- Eye Brows:
- Eye Brows Asymmetry
- Eye Brows Center Up / Down
- Eye Brows Depth
- Eye Brows Up / Down
- Eye Brows Height
- Eye Brows Mid Depth
- Eye Brows Mid Up / Down
- Eye Brows Outer Up / Down
- Eye Brows Width
- Cheeks and Jaw:
- Cheeks Asymmetry
- Cheeks Dimples
- Cheeks Sink
- Cheeks Volume
- Chin Cleft
- Chin Depth
- Chin Dimple
- Chin Height
- Chin Size Smaller
- Jaw Line Adjustment
- Jaw Size
- Jaw Under Volume
- Eyes:
- Eyes Angle
- Eyes Angle Inner
- Eyes Angle Outer
- Eyes Distance Smaller
- Eyes Distance Wider
- Eyes Iris Size
- Lower Eye Lids Up / Down
- Above Eyes Smooth
- Eyes Position Down
- Eyes Position Up
- Eyes Rotation
- Eyes Size
- Below Eyes Smooth
- Below Eyes Puffy / Sink
- Mouth:
- Gums Forward / Back
- Gums Up / Down
- Lower Lip Volume
- Upper Lip Volume
- Upper Lip Top Peak
- Lips Asymmetry
- Lips Thin / Big
- Mouth Corners Up / Down
- Mouth Depth
- Over Mouth Smooth
- Mouth Smaller
- Below Mouth Smooth
- Mouth Up / Down
- Teeth Smaller
- Nose:
- Nose African
- Nose Asian
- Nose Caucasian
- Nose Greek
- Nose Bridge Depth
- Nose Bridge Upper Reduce
- Nose Bridge Width
- Nose Broken
- Hooked Nose
- Philtrum Width
- Nose Prominent
- Nose Ridge Size
- Nose Root Depth
- Nose Slope 1
- Nose Slope 2
- Nose Size (Smaller / Bigger)
- Snub Nose
- Nose Tip Length
- Nose Tip Up / Down
- Nose Tip Volume
- Nostrils Left / Right
- Nostrils Size (Smaller / Bigger)
- Nostrils Up / Down
- Nostrils Wing Size (Smaller / Bigger)
- Eye Lashes:
- Eye Lashes Length
- Face:
- Face Asymmetry
- Face Depth
- Face Length
- Face Old
- Face Young
- Face Round
- Face Thin
- Face Width
- Forehead Flat
- Temples Depth
- Shape Presets:
- Reset Presets (Full Face and Partial)
- Face Young
- Face Old
- Face Round
- Face Long
- Ears:
Daz 3D is part of 
Connect
DAZ Productions, Inc.
7533 S Center View Ct #4664
West Jordan, UT 84084
Licensing Agreement | Terms of Service | Privacy Policy | EULA
© 2024 Daz Productions Inc. All Rights Reserved.
Comments
Oh nice! We can use more resources for the guys - these look great! I look forward to them. :)
I’m looking forward to this,
Thank you! Glad you like lit.
A PBM pack will follow, just being finished.
But I think I will create for the females too later, after my vacation.
@Divamakeup: btw, I like your Altern8 SSS a lot , nice addition to my library :)
OH cool! I can use the female ones too, for sure! :)
I'm glad you like Altern8 - that makes me happy to hear!
Enjoy your vacation. I hope you get rested and recharged and have some fun!
yeah, I think the same, one cannot have enough resources :)
Used Altern8 quite some time yet, getting good results :)
Thank you! I will try to relax hehe and think about new products :D
If you're still working on this, or if you're interested in doing more, I would like face morphs that make "ugly" guys, or guys that look like bruised, battered boxers, with obviously broken noses, puffed and battered lips, cauliflower ears, etc. And morphs for guys who are posed as boxers or other fighers, taking blows, with their faces twisted, as can be seen in photos of boxers taken during matches. Any chance you'll do some of those? For the Genesis 3 guys, there was a product called Mean Mugs, or something like that, but that product has not been updated for the Genesis 8 guys.
I look forward to supporting you by buying this product. I am 'female' character'd out and really appreciate the attention to things male.
It has been already submitted and passed QAV and release will be scheduled, I cannot change it anymore at this point, but your ideas are good. I can still do updates later on though.
Morphs for a broken nose and also a hooked nose (low or strong as how much you dial them in) are included, so you can change at least this. There are morphs to let the under eyes area appear "swollen" , lips can be made puffy too. I had not a boxer in mind while doing those, but guess, they could do the job too. Let me try to make a sample render with such morphs , in combination with some of our wound products that will come for males to get a battered look :) There is our Easy Teeth product, that can be used (also MR) to loose some teeth etc for instance. Might be a good addition as well for such looks.
Thank you
Support is always welcome, glad you like that product. A Body Kit with over 100 morphs (PBMs and some FBMs) will follow too later on, currently being in QAV.
Well I made one using the morphs, nose broken, greek, prominent, hooked, eyes below puffy, lips puffy and the face older and thin, cheeks bigger, chin size/cleft and the asymmetry morphs I have included.
Not all dialed in at 100, it is a mix, just the way I felt it looks good.
It is the Ollie 8 skin (that appears older), the blood, black eye and wounds and baind aid are from one of our products that are not yet released. The teeth gap and teeth mats are done with our Easy Teeth product.
The eyes are closed/squinted a bit just with the default pose controls for G8M.
Well, I see that you (or I) could get some of the effect. But I was really hoping for what happens to a boxer's face as it is hit with a blow in the ring. It's more wildly distorted. Hope you consider making a product like that in the future.
Ok, now I see what you mean. Yes, this should be possible, but as "one side" morphs only then (sides separately) and lot more deformation is needed then.
This might require bone adjustment as well. I will need to look into that, if bones are needed to be adjusted to that the pose controls (eye closed etc.) still work correctly.
As to MRs it is better when not much bone adjustments are needed, I include them in the morphs, but they get lost when someone bakes a new morph using the MRs morphs and needs to do all the bone stuff again.
But when using only as morph to alter the face (like with any other non MR product) without the need to bake new morphs, there is no difference then.
But this is for sure a good idea for a product, I made a note :) I am going on vacation soon but will look into that in July then.
well, I did something as test, how far I can go there .
It is only a screenshot and shows only deformation of the cheek and lips , and there needs to be done more adjustments (mesh smoothing etc.) , but I guess this is the way it goes basically
OK. Well, thanks for making a note and keeping this in mind. Hopefully, you'll work on a new product later in the summer then.
you are welcome. If I can achieve satisfying results I will for sure like to create such a pack :)
Love the cut over the brow, it’s very realistic. Looking forward to that product as well.
Thank you
This is a joint creation of RiverSoft Art, Karth and me, everything will be panel driven (or the old way with presets but with limitations) with lots of options, like moving the wounds around, moving the band aids etc. , flipping them and much more. There will also be bandages included as wearables. We are still in the creation process and I guess it won't be finished before mid of July (earliest).
Here is just a little preview how it would look like :)
You might be also interested in our Body Morph Kit, will be released soon too
Special Discounts Available for a limited time
https://www.daz3d.com/06-19-bathroom-bundle