Loading...
> >

mcjGRBL - Control G-Code Devices From Daz Studio - mcjGRBL2 Marlin Laser

mCasualmCasual Posts: 4,607
edited May 2018 in Freebies

this is mainly for techies

it's the basics (PC only) needed to communicate with serial devices

there's a version called mcjTTY which is a simple terminal, much like arduino's "monitor"

the GRBL version adds some GRBL-specific features (not much but it saves time )

https://sites.google.com/site/mcasualsdazscripts9/mcjgrbl

 

image

image

image

image

image

bpromo.jpg
1920 x 1080 - 450K
cloo.jpg
800 x 1067 - 197K
dem2.jpg
800 x 800 - 97K
dem1.jpg
800 x 800 - 82K
promoita.png
800 x 800 - 107K
Post edited by mCasual on

Comments

  • mCasualmCasual Posts: 4,607
    edited February 2018

    there will probably be a version for 3-degrees of freedom robot arms

     

    IMG_20180204_205244.jpg
    4160 x 3120 - 1M
    Post edited by mCasual on
  • mCasualmCasual Posts: 4,607
    edited February 2018

    i used this grbl file for this demonstration

    G0 Z0G0 Z2.5G0 Y4G0 Z0G0 Z2.5G0 Y0G0 Z0G0 Z2.5G0 Y-4G0 Z0G0 Z2.5G0 Y0

    VIDEO !

    https://mcasual.deviantart.com/art/mcjGRBL-Control-GRBL-Devices-From-Daz-Studio-729439788

    boyzee.jpg
    288 x 512 - 35K
    Post edited by mCasual on
  • mCasualmCasual Posts: 4,607
    edited May 2018

    UPDATE UPDATE

    i posted mcjGRBL2 - Which is a version that works with the Marlin firmware

    and i posted info on how to make a laser on/off TTL input controlable by Marlin

     

    https://sites.google.com/​site/mcasualsdazscripts9/mcjgrbl2

     

    whatttt.jpg
    1920 x 1440 - 454K
    lazzz.jpg
    800 x 1067 - 233K
    Post edited by mCasual on
  • Eustace ScrubbEustace Scrubb Posts: 2,698

    It's all geek to me...!  ;)

  • mCasualmCasual Posts: 4,607
    edited May 2018

    UPDATE UPDATE UPDATE mcjGRBL2

    which is a Daz Script that lets you send G-Codes to devices attached to a COM (usb) port

    ( Only tested on a Marlin + Ramps 1.4 + Arduino Mega machine,

    but should work for other G-Code 3D Printers, CNCs and Lasers

    that issue an "OK" after each accepted command

    https://sites.google.com/site/mcasualsdazscripts9/mcjgrbl2

    May 18th 2018 12:36 AM - New version reacts correctly to Marlin's "Busy" messages  

    by ignoring them and waiting for the OK from the previous command before sending a new one

    Here you can see a cutout ( g-code file ) that was succesfully sent to my laser cutter !

     

    gabopnahorse.jpg
    1080 x 2560 - 376K
    Post edited by mCasual on
Sign In or Register to comment.