Loading...
> >

Experiments, discovery and experience

123468

Comments

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,214

    it really only needs fit the clothing face and ears etc need not be exact, fingers some like to do gloves 

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,214
    edited March 2019

    how it fitted exported as one piece

    I think separates might be better in this case, I am not fussed by pokethrough as simply hide those parts but as one it intersects itself

    just some suggestions for those using my rough pose

    a clone shape if made can have sizing morphs added etc, one advantage of that method which I would do if making for my own use, sadly not shareable

     

    fitted.jpg
    1920 x 1920 - 496K
    Post edited by WendyLuvsCatz on
  • VyusurVyusur Posts: 2,235
    edited March 2019

    The very recent experiment with G3 clone:

    Leon_iconic01.png
    1300 x 1690 - 1M
    Post edited by Vyusur on
  • VyusurVyusur Posts: 2,235
    Wendy_Carrara said:

    how it fitted exported as one piece

    I think separates might be better in this case, I am not fussed by pokethrough as simply hide those parts but as one it intersects itself

    just some suggestions for those using my rough pose

    a clone shape if made can have sizing morphs added etc, one advantage of that method which I would do if making for my own use, sadly not shareable

    Nice outfit, looking delicious!

     

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,214
    edited March 2019

    now doing what I do to create clone shapes for other figures which sadly cannot be shared, at least by me cheeky

    if you Veronica can do one you can submit it to DAZ and ask them for permission to sell it as they have given permission to others for clone shapes within the store, they can only say no devil

    I refined it in DAZ studio with smoothing modifier then used a shrinkwrap modifier in Blender, base mesh not split

    then imported that to check against Leon

    and export that as an obj to create a clone, will be able to go both ways on clothing etc

     

     

    while Veronica is more skilled than I am, I am sharing this for everyone else and read Leanas thread for more details like I did heart

    I now will fit it to leon and load a base obj of Genesis on it in morphloader

    then fit Leon to it

     

    leon clone shape.jpg
    1920 x 1920 - 1M
    Capture.JPG
    1918 x 1040 - 204K
    Post edited by WendyLuvsCatz on
  • VyusurVyusur Posts: 2,235

    I don't think that it worth it. I have so many other good ideas that are not realized yet.

  • VyusurVyusur Posts: 2,235

    Wendy, you suggested very good method of making clone. Thank you! I used Zbrush projection as you advised.

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,214
    Vyusur said:

    Wendy, you suggested very good method of making clone. Thank you! I used Zbrush projection as you advised.

    glad that worked for you it didn't for me but then my Zbrush skills are nonexistent blush

    meanwhile I have a setback 

    image_2019_03_28T17_41_04_958Z.png
    753 x 580 - 82K
  • Persona Non GrataPersona Non Grata Posts: 1,365
    <<p>INSPIRED BY FIRST POST

    A simple use of Glare to create sparkles together with downloadable Carrara file for the fun of it.


    Selina

    zip
    zip
    Sparkle.zip
    21K
  • Bunyip02Bunyip02 Posts: 8,615
    Wendy_Carrara said:

    its a bit rough so add a smoothing modifier to the clothes if it hasn't got one and collide it against a hidden Leon before exporting obj's too

    Thanks for the tip, now back to renders !!!

  • Bunyip02Bunyip02 Posts: 8,615
    edited March 2019
    Vyusur said:

    I don't think that it worth it. I have so many other good ideas that are not realized yet.

    A series of clones might be worth it, K4-M4-Genesis-Genesis 2M-Genesis 3M-Genesis 8M

    PS Good to know that there are more goodies being lined up !!!

    Post edited by Bunyip02 on
  • WendyLuvsCatzWendyLuvsCatz Posts: 38,214
    edited March 2019

    he let his hair grow out

    yeah thats a toe poking through

    ahairs0009.jpg
    685 x 957 - 154K
    Post edited by WendyLuvsCatz on
  • VyusurVyusur Posts: 2,235

    Wow! I thought It was a mermaid.

  • Bunyip02Bunyip02 Posts: 8,615
    edited March 2019

    Streets of Asia 4

    Asia Leon 1 1600.png
    1600 x 1200 - 3M
    Post edited by Bunyip02 on
  • VyusurVyusur Posts: 2,235

    Very beautiful and tranquil, Bunyip! And the outfit is nicely fitted. Why don't you use fiber eyelashes? They work perfectly in Carrara and don't require any transmaps.

  • Bunyip02Bunyip02 Posts: 8,615
    Vyusur said:

    Very beautiful and tranquil, Bunyip! And the outfit is nicely fitted. Why don't you use fiber eyelashes? They work perfectly in Carrara and don't require any transmaps.

    Ooooops, knew I forgot something blush Very nice figure, Wendy's pose preset works well especially when combined with the smoothing modifer/collision method !!!

  • Bunyip02Bunyip02 Posts: 8,615
    Selinita said:
    <

    INSPIRED BY FIRST POST

    A simple use of Glare to create sparkles together with downloadable Carrara file for the fun of it.


    Selina

    Very nice Selina !!!

  • UnifiedBrainUnifiedBrain Posts: 3,588
    Vyusur said:

    Playing with Leon in Carrara.

    Converted to Blended weights, Leon is fully compatible with Carrara, as well as all his content.https https://youtu.be/TBgc-7L1LMM

    Thanks for that video, Vyusur.  Incredible accomplishment in creating the Leon character, btw.

    Some Daz users will never even give him a try because he is not native Genesis.  Do you know if he works in Poser?  That might broaden your base a bit.

    Are you planning other characters?  I hope so.  Your design parameters seem to be both aesthetic and intelligent, without the proprietary side effects of the later Genesis models..

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,214
    UnifiedBrain said:
    Vyusur said:

    Playing with Leon in Carrara.

    Converted to Blended weights, Leon is fully compatible with Carrara, as well as all his content.https https://youtu.be/TBgc-7L1LMM

    Thanks for that video, Vyusur.  Incredible accomplishment in creating the Leon character, btw.

    Some Daz users will never even give him a try because he is not native Genesis.  Do you know if he works in Poser?  That might broaden your base a bit.

    Are you planning other characters?  I hope so.  Your design parameters seem to be both aesthetic and intelligent, without the proprietary side effects of the later Genesis models..

    I tried getting him into Poser by converting to triax and exporting a cr2 without success, he comes in but as two meshes no IK, not tried FBX yet

  • VyusurVyusur Posts: 2,235
    UnifiedBrain said:
    Vyusur said:

    Playing with Leon in Carrara.

    Converted to Blended weights, Leon is fully compatible with Carrara, as well as all his content.https https://youtu.be/TBgc-7L1LMM

    Thanks for that video, Vyusur.  Incredible accomplishment in creating the Leon character, btw.

    Some Daz users will never even give him a try because he is not native Genesis.  Do you know if he works in Poser?  That might broaden your base a bit.

    Are you planning other characters?  I hope so.  Your design parameters seem to be both aesthetic and intelligent, without the proprietary side effects of the later Genesis models..

    Hi UB! Thank you for your nice comment. I don't have Poser and I never used it. As for loyal fans of Genesis figures, it was always on my mind. But the most important thing for me that I could realize my treasured dream. I always dreamed to create my own figures. I plan to move in this direction in closest future.

  • Bunyip02Bunyip02 Posts: 8,615
    edited March 2019

    Any Karate kicking Alien Critters on your to-do list (please, please, pretty please !!!) ?

    Alien Karate 1.png
    2400 x 1800 - 3M
    Post edited by Bunyip02 on
  • VyusurVyusur Posts: 2,235
    Bunyip02_Carrara said:

    Any Karate kicking Alien Critters on your to-do list (please, please, pretty please !!!) ?

    I'm going to make some sci-fi/fantasy critters later. It's possible to accompany them with action poses.

     

  • DiomedeDiomede Posts: 15,169
    Vyusur said:
    Bunyip02_Carrara said:

    Any Karate kicking Alien Critters on your to-do list (please, please, pretty please !!!) ?

    I'm going to make some sci-fi/fantasy critters later. It's possible to accompany them with action poses.

     

    Yay!  I'm all for sci-fi critters!

    Based on forum comments, I think that a female to go with Leon would please a lot of people.  Whether that is a separate figure or a FBM for Leon, I defer to your judgment.  Whatever you decide to work on, I am looking forward to it.  Great stuff.

     

  • Bunyip02Bunyip02 Posts: 8,615
    Vyusur said:
    Bunyip02_Carrara said:

    Any Karate kicking Alien Critters on your to-do list (please, please, pretty please !!!) ?

    I'm going to make some sci-fi/fantasy critters later. It's possible to accompany them with action poses.

     

    Woo-hoo !!!

    Looking forward to all of your goodies !

  • Persona Non GrataPersona Non Grata Posts: 1,365
    edited March 2021

    .

    Post edited by Persona Non Grata on
  • VyusurVyusur Posts: 2,235

    You never know what you will come up with when modeling while recording. Here's an example of a recent ear modeling.

    Just improvising.

  • HeadwaxHeadwax Posts: 9,987

    lovely to watch the process - reminds me when I used to use anim8or

    but much more polished of course (yours not mine!)

    thanks for sharing 

  • VyusurVyusur Posts: 2,235

    Andrew, thank you for your kind words! Never heard about anim8or. Just today read about it in Wiki.

  • VyusurVyusur Posts: 2,235

    Do you have any videos with your modeling process?

  • Bunyip02Bunyip02 Posts: 8,615

    Love your topology, I still need heaps of practice to get that without heaps of ngons !

Sign In or Register to comment.